Jump to content

Archived

This topic is now archived and is closed to further replies.

acangiano

DMS toolbar only available for the homepage

Recommended Posts

acangiano    0
acangiano

Hi there,

 

I'm working on a site for which the DMS toolbar appears to be available on the homepage only. When I select a different page, in order to give it a different look, that page will display CSS-less and no editor will show up at the bottom. If I load the page while not logged in, it is rendered properly (but obviously without the DMS editor/toolbar as I'm not logged in.) Is this a known limitation? If not, what do you think might cause this problem?

 

 

Thanks in advance,

Tony

Share this post


Link to post
Share on other sites
greenfly    230
greenfly

Hi acangiano

 

Could we have a link to your site please?


The answer to many issues can be found by searching in the forum before posting as someone else  may very well have had the same problem before you have.  Also, reading the documentation can help you gain a good understanding of how everything works. 

 

Please do not send me private messages. Occam's razor - The principle states "Keep things simple!"

Share this post


Link to post
Share on other sites
acangiano    0
acangiano

Hi Martin,

 

I private messaged you the URL, even though the problem is only visible when logged in.

Share this post


Link to post
Share on other sites
greenfly    230
greenfly

ok, in that case, if you can create an admin account for us for your site and send the credentials to hello @ pagelines.com we can take a look on your site for you. 

 

Please include a link to the forum topic so we know to what it relates. 


The answer to many issues can be found by searching in the forum before posting as someone else  may very well have had the same problem before you have.  Also, reading the documentation can help you gain a good understanding of how everything works. 

 

Please do not send me private messages. Occam's razor - The principle states "Keep things simple!"

Share this post


Link to post
Share on other sites
acangiano    0
acangiano

ok, in that case, if you can create an admin account for us for your site and send the credentials to hello @ pagelines.com we can take a look on your site for you. 

 

Please include a link to the forum topic so we know to what it relates. 

 

Thanks Martin. I just sent the email as requested.

Share this post


Link to post
Share on other sites
James B    436
James B

Hi there,

 

Currently the css on the page is showing as draft css rather than the compiled css. Please try updating to the latest edition of 1.04 to see if this fixes the css issue, currently looks like it's on 1.03, an update was pushed earlier with minor fixes included.


Kindly search the forum and read the documentation before posting. It will help you resolve many issues.

For CSS help be sure to check out W3Schools first and be sure to download FireBug for FireFox for troubleshooting.

James B

Share this post


Link to post
Share on other sites
acangiano    0
acangiano

Thank you, James. I updated to 1.04, but unfortunately I'm still experiencing the problem.

Share this post


Link to post
Share on other sites
greenfly    230
greenfly

Hello Acangiano

 

We will take another look for you 


The answer to many issues can be found by searching in the forum before posting as someone else  may very well have had the same problem before you have.  Also, reading the documentation can help you gain a good understanding of how everything works. 

 

Please do not send me private messages. Occam's razor - The principle states "Keep things simple!"

Share this post


Link to post
Share on other sites
acangiano    0
acangiano

Hello Acangiano

 

We will take another look for you 

 

Thank you. Much appreciated.

Share this post


Link to post
Share on other sites

  • Similar Content

    • JawDesigns
      By JawDesigns
      Hi everyone,
      Flywheel have reported errors on my clients site 'www.racewaredirect.co.uk' and it's not loading. Can someone please provide some information on how to fix this? The site has never experienced these issues before.
      Thanks,
      James Wilson
    • Peter Esslemont
      By Peter Esslemont
      Hi,
      When using the editor I am getting duplicate wordpress toolbars and an a nice error to go with it...
      I have them stack 4 high at one point.  Goes away with a refresh then re-appears.
      very odd.

       
       

    • MissT
      By MissT+
      Hi there,
      I've got an issue with 3 websites built with DMS since I migrated them from http to https that I need help with please.
      When any changes are made - e.g. new posts added or existing posts amended - certain sections of the live site seem to break e.g. image headers hang and don't load (b/g on canvas section), sliders hang and don't load (Revslider), flipper section doesn't load.
      Logging in and then clicking 'Edit the site using DMS' seems to fix the problem. Often if I try to open up another browser window to edit the site / re publish I'm unable to as the page wont load / hangs while trying to load.
      Any ideas how to fix this? On a couple of the sites I've installed a caching plugin as I thought it might be a loading speed issue but it's still happening.
      Website URL's can be provided privately.
      Many thanks in advance.
    • jeomiland
      By jeomiland+
      Hi
      I found this topic
      which talks about a similar issue I am having, but a little different. Hope someone can help me out.
      Best way to see the problem is to view http://cassclayton.com/ on Safari (Mac) compared to Firefox or Chrome. You will see the banner just under the fixed menubar has a gap between the menubar and top of the banner. Looking at Inspector, I found:
      <div class="fixed-top-pusher" style="height: 62px;"></div>
      <script> jQuery('.fixed-top-pusher').height( jQuery('.pl-fixed-top').height() ) </script>
      and indeed it seems the jquery is not always working consistently. For instance, if you simply refresh the page in Safari, it will loose the gap and all looks fine, so is it a browser cache issue that is interacting with the jquery? I do have W3 Total Cache installed. There must be a way to tell the code to make sure jquery is up and running and available to do it's majic?
      And perhaps there is just a better way to do this banner? Originally I tried several DMS sections and used the banner image as background, etc... Kept running into problems with resizing and the left/right parts of the image were getting chopped off. It is important the whole image show, so currently I just use a NextBox section with this code:
      <img src="[pl_site_url]/wp-content/uploads/2015/12/CassClayton-blues-tribute-banner.jpg" width="100%" />
      and it looks the way it should. Is there a better way to place a banner graphic under a fixed navbar and make sure the whole banner graphic displays regardless of screensize?
       
    • Michael Kummer
      By Michael Kummer+
      Hi guys,
      every since Chrome introduce scroll anchoring (see chrome://flags) blog posts on my page start scroll automatically as soon as the user scrolls down a bit. It is super annoying and I don't know exactly what triggers the incompatibility with Chrome's latest feature that is supposed to improve usability.
      Since I don't know what causes it (Pagelines, or a Plugin), I would like to disable the feature using a CSS override that Google describes as follow:
      "Scroll anchoring aims to be the default mode of behavior when launched, so that users benefit from it even on legacy content. A CSS property overflow-anchor can disable scroll anchoring in part or all of a webpage (opt out), or exclude portions of the DOM from the anchor node selection algorithm. This property supports the following values when applied to an element E:
      overflow-anchor: auto (the default value) declares that the DOM subtree rooted at E is eligible to participate in the anchor node selection algorithm for any scrolling box created by E or an ancestor of E. overflow-anchor: none declares that the DOM subtree rooted at E is not eligible to participate in the anchor node selection algorithm for any scrolling box created by E or an ancestor of E." Do you guys happen to know how to use that property with the ROOT element so it applies to the whole page?
      Thanks
      Michael 
×