Jump to content

Archived

This topic is now archived and is closed to further replies.

jfreemom

Revolution Slider won't Go Full Width

Recommended Posts

jfreemom    0
jfreemom

I have been trying to get the REvolution slider to go full width while in the column and section area. It will not do it...It only gets bigger in height when I change the settings from auto-responsive to fullscreen. Any help with this would be greatly appreciated.

 

Here's the site I'm working on.

 

http://jfreemom.wpengine.com

 

Thanks,

Jamain

Share this post


Link to post
Share on other sites
thebastion    20
thebastion

Looks like you have put the slider in a widgetized area inside of the header. Take it out and place it inside a section area on its own?

 

Also placing anything in the header section will make it display on every page.

Share this post


Link to post
Share on other sites
jfreemom    0
jfreemom

thebastion Thanks for pointing that out...I overlooked that after I had deleted the other section under the template area. Yeah I figured out the header thing about 2 hours after working with DMS...lol! But the problem still persists even after following the instructions above. The slider will not go full width for anything. It suggests using the CSS ID as the basis for the full width so I tried that as well and it was a no go. Has anybody else have a working example on a DMS site with the full width?

Share this post


Link to post
Share on other sites
Danny    1,327
Danny

Hi,

 

Is this now resolved, just visited your website and the RevSlider appears to be full width.


Please search our forums, before posting!

Share this post


Link to post
Share on other sites
jfreemom    0
jfreemom

Danny It was the Slider Revolution plugin by themepunch. It's still not working properly. The PL Rev Slider works fine, just the sizing and the difficulty of customizing the slides stuff versus the ease of use of the Slider Revolution was my reason for trying to use the Slider Revolution plugin. In the compatibility section, they said they had it working with DMS.

Share this post


Link to post
Share on other sites
Danny    1,327
Danny

jfreemom

Can you send me the plugin, as I don't have access to it, with it being a premium plugin. Once I have the plugin, I can test it for you.

 

danny at pagelines dot com


Please search our forums, before posting!

Share this post


Link to post
Share on other sites
jfreemom    0
jfreemom

Danny It's been sent! Thanks for your help with this.

Share this post


Link to post
Share on other sites
Danny    1,327
Danny

OK, the slider does work, but making it full width isn't going to be as easy as adding the code to a section. At this moment in time, we do not have a section that allows content to be full width expect for our version of RevSlider.

 

So what we can try and do is use CSS to remove the content width for that area and make the Slider 100%. If you can provide the page where the RevSlider plugin is active, I can take a closer look.


Please search our forums, before posting!

Share this post


Link to post
Share on other sites
Danny    1,327
Danny

Just a little update for you.

 

One of our store developers ETCook, has kindly created a new section called FullBox which is based on the TextBox section. Its basically, a full width TextBox, which is powerful as you can add your sliders shortcodes to the FullBox section and make your slider full width.

Its a free download and is available here - http://etc.bz/R6Rn

 

Simple install it as a plugin, active it and then go to the DMS Toolbar > Add Section and click the Reload Sections button, then Boom, FullBox is activated. Enjoy!

Props goto ETCook - http://www.etc.io/


Please search our forums, before posting!

Share this post


Link to post
Share on other sites

  • Similar Content

    • Jared Smith
      By Jared Smith+
      I'm trying to make a visible border around the entirety of a client's site.  Example on some other site here:
      http://www.makeyourvisionreal.com/movement

      So it is around the Title, Menu, and Content Area.  I'm having a bit of difficulty with this on pagelines, using the Framework theme. It's slightly more complex because the site has a "landing page" that doesn't need the border. Much like this homepage
      http://www.makeyourvisionreal.com/
       
      Right now I'm using a content width of 80%, and fullscreen.  But maybe thats not the best way to do it.  
       
      So, with the #site id, I can hit the whole area on most of the site, but I'm not sure how I can remove it for just one page.
      #site { border:1px solid #ccc; margin: 100px 5% 5% 50px; } anyone have any suggestions?  Maybe I need to go make a child template, not sure?  Thanks!
    • Perry
      By Perry+
      Hello There, 
      I am working with Platform 5 and have run into an unnerving problem. I am trying to position my clients picture along the bottom of the container, so that it sits right on the bottom. After a good hour of googling and messing with the CSS I figured I would ask the question here. Below is my screenshot displaying my problem. I will need to do this frequently in the future. 
      My Problem Image
      Unlike in DMS, when I add a margin to an embed or image box it simply makes the container larger while keeping the padding, I cannot have any padding or any space whatsoever on the bottom of my clients image.  Is there a way to remove all padding from the container so I can have this work across screen sizes? If not is there anyway to position an element directly at the bottom of another element in Platform 5? This seems like a basic feature and was easily attainable within DMS. 
      I cannot create an image combining all these elements as it will not scale well on mobile and will make my clients logo unreadable and her face incredibly small. 
       
      Thank you for any help,
      Perry
    • Perry
      By Perry+
      Hello there,
      We are still using DMS 2 and were wondering if it was at all compatible with slider revolution. (https://codecanyon.net/item/slider-revolution-responsive-wordpress-plugin/2751380). Our issue is that the default revslider for DMS clips the top and sides of videos when made responsive. As the video is made smaller or larger the bottom of it tends to be cut off, or the sides are. We noticed slider revolution was 100% responsive, but have had numerous issues even getting it to display in DMS 2. We have tried using the shortcode, and various php scripts to no avail. Our last attempt was to try and load it with header scripts, but at this point we seem to be further away than ever. 
      This leads me to a few questions:
      1. Is Slider Revolution even compatible with DMS2?
      2. Is there a way we can get 100% responsive video in DMS 2 with zero clipping? (tonyrobbins.com is another good example of the effect we are trying to achieve.)
      3. If Slider Revolution is compatible, how do we go about adding it in?
       
      Thank you for any help.
       
    • FRevi
      By FRevi+
      I am trying to achieve a gallery (Envira Gallery plugin) that spans the full width of a page, within Platform 5 theme. Can't figure it out.
      The page should look roughly like this: www.frankrevi.photography/envira/favorites-2 (maybe minus the title, that's another story). This is a standalone gallery page and not part of my site. Nothing links to it.
      But instead it is this on the real page: www.frankrevi.photography/favorites.
      Currently I have the gallery in a Pagelines Framework Content section. My framework content wrap is set to unwrapped full width. I'm using all 12 columns. In Pagelines Settings, my Layout/Nav Content Width is set to 100%.
      How can I get the gallery on the real page URL to be the full page width please?
    • vanessabt
      By vanessabt+
      Hi Developers, I wasn’t sure what the best way to get feedback was but didn’t really want to put this in the facebook group, I did put this in the slack developers group but trying to figure out the fastest way to get feedback.  I am starting a new site for a client and was looking through the showcase to see if there were any samples for slider modifications like I am trying to do for our build and couldn’t find them.  Basically I want to have a blue section at the bottom of each slide that has text in it.  The text will change with each slide along with the image.  Was wondering if anyone had any thoughts on how this modification could be made?  Here is a sample of the slider from the design.

×